Иногда может понадобиться доставить на виртуальный шлюз сертификаты или политику безопасности в виде конфигурационного файла, например, используя USB Flash.
1. Для подключения к виртуальной машине USB Flash выделите виртуальную машину и нажмите кнопку Connect/Disconnect the USB devices to the virtual machine, выберите пункт Connect to USB device и выберите необходимое устройство (Рисунок 16).
Рисунок 16
2. В появившемся предупреждении нажмите кнопку ОК (Рисунок 17).
Рисунок 17
3. В dmesg появятся сообщения о подключении нового устройства:
root@sterragate:~# dmesg
…
[ 4048.413192] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 4049.887342] usb 1-1: New USB device found, idVendor=8644, idProduct=800e
[ 4049.887347] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4049.887352] usb 1-1: Product: USB Flash Disk
[ 4049.887355] usb 1-1: Manufacturer: General
[ 4049.887359] usb 1-1: SerialNumber: 80130004000017E6
[ 4049.887668] usb 1-1: configuration #1 chosen from 1 choice
[ 4049.960300] Initializing USB Mass Storage driver...
[ 4049.960770] scsi3 : SCSI emulation for USB Mass Storage devices
[ 4049.961049] usb-storage: device found at 2
[ 4049.961052] usb-storage: waiting for device to settle before scanning
[ 4049.961091] usbcore: registered new interface driver usb-storage
[ 4049.961096] USB Mass Storage support registered.
[ 4055.271609] usb-storage: device scan complete
[ 4055.300172] scsi 3:0:0:0: Direct-Access General USB Flash Disk 1.0 PQ: 0 ANSI: 2
[ 4055.301643] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 4055.348736] sd 3:0:0:0: [sdb] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 4055.407924] sd 3:0:0:0: [sdb] Write Protect is off
[ 4055.407930] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4055.407934] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4055.553698] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4055.553916] sdb: sdb1
[ 4055.684798] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4055.685008] sd 3:0:0:0: [sdb] Attached SCSI removable disk
root@sterragate:~# dmesg | tail
[ 4055.300172] scsi 3:0:0:0: Direct-Access General USB Flash Disk 1.0 PQ: 0 ANSI: 2
[ 4055.301643] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 4055.348736] sd 3:0:0:0: [sdb] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 4055.407924] sd 3:0:0:0: [sdb] Write Protect is off
[ 4055.407930] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4055.407934] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4055.553698] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4055.553916] sdb: sdb1
[ 4055.684798] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4055.685008] sd 3:0:0:0: [sdb] Attached SCSI removable disk
4. Создайте новую папку для монтирования:
root@sterragate:~# mkdir /home/usb
5. Примонтируйте добавленное устройство:
root@sterragate:~# mount /dev/sdb1 /home/usb
6. Устройство готово к использованию.